- Inspect Ac system for leaks. Check compressor pressures. Recover freon from system. Remove and replace schrader valves as needed. Vacuum test system. Charge freon to proper capacity. Inspect AC lines and condition of belt. Verify proper operation of AC system. Recovered lbs. of freon, filled to lbs. Initial high side pressure was psi. and low side was psi.
- Perform inspection and note results on tablet.
- Performed visual inspection and found the blower motor resistor electrical connector is burnt.
- Removed and replaced the blower motor, resistor, and blower motor resistor electrical pigtail connector. Verified all blower motor speeds operate as designed.
Steve J. gave our service a 5 star review on 3/30/2021